Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Neck thru custom bass.
http://www-.luthiersforum.com/forum/viewtopic.php?f=10130&t=32867		 Page 1 of 1
Author:  tunguskaevent3 [ Thu Jul 14, 2011 12:38 pm ]
Post subject:  Neck thru custom bass.
Built for a customer. Mahogany body, rock maple and padauk thru neck. Padauk fingerboard, head plate, knobs, and cavity cover. Wenge strips in the body. Came out pretty nice! Varnish/oil mix for finish.

Image
Chambered slightly to reduce weight.

Image
mock up

Image

Image

Image
safety planed and ready for carve.

Image
Finished product

Image

Image

Image

Image

Image

Image

Image

Image
Bookmatched!

Image
Bookmatched head too, spalted maple inlay

Image

Image

Image
Author:  Chris Pile [ Thu Jul 14, 2011 2:56 pm ]
Post subject:  Re: Neck thru custom bass.
I like it!
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/